The new Danfoss Gas Detectors are based on an intelligent platform and intuitive user-interface, Danfoss’ complete line of fixed gas detectors range from basic to heavy duty models with sensor technology to match the specific refrigerant, application, and safety requirements of your system.

Danfoss Gas Detectors are based on a digital platform that delivers multiple communication and integration options for improved operational reliability, easy calibration and maintenance efficiency, cost effectiveness, and regulatory compliance.

Danfoss is committed to providing sustainable solutions that reduce energy consumption and greenhouse gas emissions. By using Danfoss gas detection units, you can ensure the safety and efficiency of your systems, while also contributing to a greener future.

For further Details:
Visit: www.reftools.danfoss.com
Email ID:
Toll Free: 000289

If you are looking for a reliable and efficient way to remove non-condensable gases from your ammonia refrigeration system, you might want to check out the Danfoss Intelligent Purging System (IPS). The IPS is a self-contained unit that automatically purges up to eight points in your system, reducing the power consumption and improving the performance of your plant. Here are some of the features of the IPS that make it a smart choice for your cooling needs:

- Patented sensor technology: Detects and purges air and non-condensable gases
- Easy installation, operation and maintenance: no manual intervention or adjustment required, user-friendly interface
- Refrigerant compatibility: Works with most refrigerants, including low-GWP and natural ones
- Application versatility: Suitable for supermarkets, cold storage, industrial refrigeration and heat pumps
- Performance and efficiency enhancement: Prevents pressure drop, compressor overload and increased emissions caused by air and non-condensable gases.

The IPS is part of Danfoss's wide portfolio of sustainable solutions for industrial refrigeration, which include valve stations, pilot valves, drain modules, and more. To learn more about the IPS and how it can help you optimize your system performance.

Visit: www.reftools.danfoss.com
Email ID:
Toll Free: 000289

BOCK® Gas and Air-Cooled Condensing Units – Designed for Performance and Reliability

Ensure optimal efficiency and dependable cooling with BOCK® condensing units, engineered for a wide range of applications and ambient conditions. Available in SHA (air-cooled), SHG (gas-cooled) and SHGZ (two-stage gas-cooled) configurations, these units deliver outstanding performance, especially in demanding environments.

Key Features and Benefits:
1. High-efficiency condensers with durable tube-fin design
2. Suitable for both medium and low-temperature cooling applications
3. Proven reliability in challenging ambient temperatures
4. Robust, speed-controllable fans — engineered and manufactured in Germany
5. Redundant fan configurations (double and quadruple) ensure product safety for cooling volumes of 27 m³/h and 48 m³/h, respectively

Improve defrost performance and reduce energy consumption for C02 and NH3 systems

Danfoss ICFD defrost module for C02, and Ammonia is a compact liquid-based drain module packaged into our widely acknowledged ICF valve station. It is a formula that unites the well-known benefits of the Danfoss ICF technology with the most efficient defrost method known into one state-of-the-art defrost solution for industrial refrigeration applications.

The solution makes it possible to equip an evaporator with ICF Valve Stations across the wet suction, liquid, hot gas, and defrost drain lines. It provides an impressive range of benefits in respect of improved operational efficiency, easy installation, and energy savings.

The ICFD Defrost Module comes in one size and two versions, ICFD 20 – Ammonia and ICFD 20C – CO2 and is fully compatible with ICF 15-4, ICF 20-4, and ICF 20-6.
The ICFD Defrost Module is part of Danfoss's sustainable solutions for refrigeration applications. Danfoss is committed to providing innovative and reliable products that help customers reduce their environmental impact and achieve their sustainability goals.

For further Details:
Visit: www.reftools.danfoss.com
Email ID:
Toll Free: 000289

Designed for cost-conscious refrigeration installations, the Danfoss Optyma™ Slim Pack is a compact, energy-efficient condensing unit that delivers reliable performance with future-ready adaptability.

Available in standard and multi-refrigerant versions, it is ideal for applications such as cold rooms, display cases, and small storage areas.

Key benefits include a simple and quiet operation, fast and safe installation, and easy maintenance. With an optimized footprint suitable for both floor and wall mounting, the Optyma™ Slim Pack is the smart choice for installers and businesses looking to balance performance, space, and sustainability.

NeoCharge: Maximize Ammonia System Performance

NeoCharge is a breakthrough solution for ammonia refrigeration systems, enabling DX systems to operate without superheat and reducing recirculation in flooded systems—all while maintaining optimal performance. Whether retrofitting an existing setup or integrating into a new build, NeoCharge is designed for simplicity, efficiency, and scalability.

Key Benefits:
1. Reduce energy consumption by up to 20%
2. Increase cold room capacity by up to 40% using the same refrigerant charge
3. Eliminates superheat in DX systems for improved system control
4. Minimizes recirculation in flooded systems to boost efficiency
5. Plug-and-play design ensures quick and easy installation
6. Compatible with all ammonia refrigeration systems
7. Ideal for both new installations and retrofit projects

GreenCHILL™ uses an Adsorption Refrigeration Cycle, in which refrigeration is produced by adsorption of the refrigerant. Unlike the vapour compression cycle, no compressor is used. The compressor is replaced by a three-step process achieved by the adsorber, and the desorber. The operation of vapour adsorption cycle is based on the ability of porous solids (the adsorbent) to adsorb vapour (refrigerant) when at low temperature, and to desorb it when heated. The hot water that drives the adsorption cycle is produced by the combustion of biomass in the hot water generator or utilizing other heat generating sources.

GreenCHILL™ achieves significant reduction in the specific energy consumption (kW/TR) reduced from 2 kW/TR to 0.15 kW/TR, in comparison to a conventional compressor. Also, mitigate the carbon emission savings of 40 & 200 Tons per annum by GC 400 & GC 2000 respectively.

GreenCHILL™ uses agri-residue such as straws, corn cob, groundnut, coconut, cashew, almond, tamarind shells, coffee grounds, wood chips/logs and processed biomass like pellets or crushed briquettes etc. as primary energy source and advocates natural refrigerant (R717) which have Zero Global Warming Potential (GWP) and Zero Ozone Depletion Potential (ODP) for providing refrigeration. Our GC 400 and GC 2000; with refrigeration capacities of 4 TR and 20 TR respectively, are versatile solutions for various applications including Pre-Cooling, Cold Storages, Ripening Chambers, Milk Chilling, Ice Plant, Process Cooling & Mushroom growing chambers etc.

IoT-enabled equipment allows for remote performance monitoring, providing real-time insights and enabling proactive management and maintenance.

MANDEV’S NEWEST INNOVATION

ONE END EXPANDED COPPER TUBE WITH PRE COATED INSERTED BRAZING COIL,
“WITH ANTI OXIDATION AGENT,”

NO FURTHER REQUIREMENTS TO FLOW NITROGEN DURING BRAZING PROCESS OF INTERCONNECTION BETWEEN TWO MANDEV PIPES.

THE BRAZING COIL WHICH IS PREINSERTED IN THE EXPANSION IS ALREADY COVERED IN AN ANTI OXIDATION AGENT

MANDEV’S BRAZING SPRAY IS AVAILABLE FOR EXTRA INTERNAL BRIGHT SURFACE

Aerofoam NBR is a black flexible elastomeric thermal insulation product available in the form of tubes and sheets, unfaced with an aluminum foil facer or with a glass cloth facer with high water vapor diffusion resistance factor and low thermal conductivity. It is suitable for applications such as duct and pipe insulation for air conditioning, cold water and hot water and refrigeration.

CRYO COOLING CONTROLLER CC-520
Input : NTC Sensor
Output : 1Relay (20Amp),with auto defrost facility
Supply : 230V AC OR 12V DC 0R 24V DC

R438A is a HFC blend, used as a replacement for R22 in domestic, industrial and commercial air-conditioning systems. It is also a retrofit replacement for R22 in low, medium and high temperature refrigeration applications and DX chiller systems.
R-438A has an ASHRAE safety classification of A1 (non-flammable) and similar pressure temperature-enthalpy characteristics to R-22, making it suitable for use in existing R-22 equipment over a wide range of evaporator temperatures with no rerating or safety reclassification of the equipment.

PACKAGING:

• ISO Tank : 19000 Kgs. Net weight
• Toners : 825 Kgs. Net weight
• Big cylinders : 61 Kgs. Net weight
• Small cylinders : 10 Kgs. Net weight

Operating voltages: 230, 415V
Sizes available: 120 to 280mm